Waste Oil Furnace CB-5000
The Clean Burn CB-5000 is the largest waste oil furnace the EPA allows. No other unit is as robust and reliable for extracting free heat from waste oils. The CB-5000, which generates approximately 500,000 BTU/hr, is the choice for large repair and service facilities with multiple bays where larger quantities of waste oil are generated and/or collected.
Need more information? 
Features
- Engineered from the ground up to burn waste oils
- Patented heat exchanger generates more heat
- Unique non-welded flue tubes for longer service life
- Advanced burner preheats oil to optimize combustion
- Swing-away burner and door make service easy
- Longest cleaning interval of all units in its class
- Lower stack temperatures, higher heat output
- Automatic flow control means no fuel adjustment required
- Ideal for unit heating or with a Clean Burn Recycling Center
Specifications
| *Maximum BTU/hour | 500,000 (147 kW) | |
| *Maximum oil consumption | 3.3 GPH (12.5 L/h) | |
| Fuels | Used oils: Crankcase,ATF, hydraulic Fuel oils: #2, #4, and #5 fuel oil |
|
| Air flow output (CFM) | Unit heater 5500 Central furnace (ducted) 0.25 SPWC (in.) 5200 0.30 SPWC (in.) 5000 |
|
| *Air compressor required | 2.5 CFM @ 25 PSI (4.25 m3/h @ 1.7 bar) |
|
| Stack Size | 10 inch dia.(25cm dia.) | |
| Furnace Dimensions, Assembled | 78” L x 38 W x 73 H (198cm x 97cm x 185cm) |
|
| Approx. Weight (uncrated) | 1036 pounds (470 kg) | |
| Electrical Requirements | 230 VAC 60 Hz, single phase 30 A circuit breaker |
Need more information?
