Waste Oil Furnace CB-140
The Clean Burn Model CB-140 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost.
It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.
Need more information? 
Features
- Engineered from the ground up to burn waste oils
- Patented heat exchanger generates more heat
- Unique non-welded flue tubes for longer service life
- Advanced burner preheats oil to optimize combustion
- Swing-away burner and door make service easy
- Longest cleaning interval of all units in its class
- Lower stack temperatures, higher heat output
- Automatic flow control means no fuel adjustment required
- Ideal for unit heating or with a Clean Burn Recycling Center
Specifications
| *Maximum BTU/hour | 140,000 (41 kW) | |
| *Maximum oil consumption | 1.0 GPH (3.8 L/h) | |
| Fuels | Used oils: Crankcase,ATF, hydraulic Fuel oils: #2, #4, and #5 fuel oil |
|
| Air flow output (CFM) | Unit heater 2000 Axial fan Furnace cannot be ducted |
|
| *Air compressor required | 2.5 CFM @ 25 PSI (4.25 m3/h @ 2 bar) |
|
| Stack Size | 6 inch dia.(15cm dia.) | |
| Furnace Dimensions, Assembled | 61” L x 32 W x 32 H (155cm x 81cm x 81cm) |
|
| Approx. Weight (uncrated) | 220 pounds (99.8 kg) | |
| Electrical Requirements | 115 VAC 60 Hz, single phase 30 A circuit breaker |
* Values indicated above are nominal. Actual values will vary depending on fuel and installation.
Need more information?
