Forward Lift DP18 Two-Post Lift
DP18Pro Heavy Duty Two-Post Lift Features:
The DP18Pro is constructed of high-strength, heavy gauge steel columns. Large gusseting on a substantial base plate foundation provides the stability and support you want for a heavy truck lift. With a capacity of 18,000 pounds your shop can start servicing work trucks, vans, or small buses, along with everything else that rolls through the door.
Truck Adapter Extensions:
The DP18Pro comes with eight high-strength, aircraft-grade aluminum truck adapter extensions. Four 5” and four 10” adapters that allow you to lift a wide range of vehicles. Because they’re made of aluminum, you’ll be able to place and maneuver them without strain and they have a convenient column bracket for easy storage.
Arms:
Forward’s heavy-duty two-post DP18Pro offers three-stage arms that can easily be extended and retracted while lying on the floor spotting a vehicle. Couple that with the light adapter extensions and you win the spotting large vehicle battle!
Extended Height Model Options:
The DP18Pro offers three different height options:
- DP18N000 (lowest height) – the overhead cross member mounts directly to the column without a column extension to fit a 155 ¾” (12’-11 ¾”) ceiling height.
- DP18N001 (standard height) – fits a 176” (14’-8”) ceiling height.
- DP18N002 (extended height) – fits a 200” (16’-8”) ceiling height.
Need more information? 
Features
Main Features:
- 18,000 lbs. capacity for lifting most trucks and vans
- Features symmetrical column design
- 3-stage front and rear arms to service a wider range of vehicles
- Three height configuration models for most ceiling heights
- Top mounted direct-pull lifting – high efficiency, low maintenance technology
Additional Features:
- Closed loop hydraulic system – protect against hydraulic contamination
- Powder coat paint is more durable than conventional coatings
- Third party tested and certified by ALI
- Padded shut-off bar
- Low profile arms and truck adapters
- Single point release lock at operations center
Specifications
| Three Overall Height Options / Models | |
| DP18PNOOO DP18PNOO1 DP18PNOO2 |
12’ 10 3/4” Low Ceiling 14’ 7” Standard Height 16’ 7” Extended Height |
| Capacity | 18,000 lbs. |
| Rise with 10” Adapter Extension | 83 1/4” |
| Height to Shut-Off | 147 1/4” Low Ceiling 167 1/4” Standard Height 191 1/4” Extended Height |
| Overall Width | 12’ 10 3/8” |
| Inside Columns | 119 5/8” |
| Drive-Thru | 108 1/4” |
| Arm Reach (Min/Max) | 30”/ 61” |
| Minimum Adapter Height | 5 1/2” |
| Voltage/Amps | 208V - 230V, 17 amps |
| Motor/Phase | 2HP / 1Ph |
| Minimum Required Ceiling Height | |
| DP18PNOOO DP18PNOO1 DP18PNOO2 |
12’ 11 3/4” Low Ceiling 14’ 8” Standard Height 16’ 8” Extended Height |
Need more information?
