Forward Lift CRA14 - Four-Post Lift
The foundation of a CRA14 14,000 lbs. capacity Forward four-post lift is the cable and pulley system under the runways. All hydraulics and mechanical lifting components are concealed in this area; tucked out of the way for a clean finish however easily accessible for inspection when needed.
Forward Lift offers a durable powder coated hammer tone paint finish on its lifts. Our four-post lifts have a multi-position lock component which allows any four-post lift to be level at any lock position. Self chocking approach ramps and wheel chocks come standard with the CRA14.
Features
Two model lengths configured for vehicles with longer wheelbases Designed with oversized slip plates and adjustable radius gauge pockets
- Tall column design adds 80 - 3/4" rise height
- Full width slip plate allows for four wheel alignments up to 157”
- Heavy duty high-performance cable and sheaves system
- Easy to use single point lift operation with air operated lock release
- Multi-position lock components allow lift to be level at any lock position
- Self-chocking 41" approach ramps with protective strip
- Heavy duty hydraulic cylinder
- Single Point latch release system
- One piece formed runway design incorporates rolling jack channels
- Rear wheel slip plates standard
- Durable powder coat finish
- Internal airline standard
Lift Options
- Drive-through ramps
- 3-phase motor
- Runway lighting
Specifications
Capacity | 14,000 lbs. (6350kg) |
Maximum Wheelbase | 182-1/2" (4635mm) 215" (5461mm) |
Maximum Two Wheel Alignment | 166-1/4" (4225mm) 199-1/4" (5060mm) |
Maximum Four Wheel Alignment | 157" (3987.8mm) 172-1/4" (4375mm) |
Minimum Four Wheel Alignment | 88" (2235mm) |
Rise | 80-3/4" (2000mm) |
Overall length | 250" (6350mm) 283" (7188mm) |
Overall width | 131-3/4" (3346mm) |
Width Inside Columns | 116-1/4" (2953mm) |
Length between Columns | 195-1/4" (4959mm) 228-1/4" (5798mm) |
Overall height | 90-1/2" (2281mm) |
Runway width | 20" (508mm) |
Runway Height | 9" (228mm) |
Width Between Runways | 43" (1092mm) or 46" (1168mm) |
Front of Runway to Center of Radius Gauge | 22-11/16" to 52-11/16" (576mm-1338mm) |
Rise Time | 72 seconds |
Motor | 2HP |
Minimum Bay Size | 15' x 26' (4572mm x 7925mm) 15' x 28' (4572mm x 8534mm) |