Forward Lift BP9 Two-Post Lift
The BP9 9,000 lbs. capacity lift is perfect for customers who need a two-post lift and have low ceilings. The BP9’s overall height is 111 ¼ inches tall. That means it will fit, even if you have 10 foot ceilings. The 'BP' stands for base plate - indicated by the steel plate that run between the two columns of the lift. This plate protects the cables that would normally run overhead on any other two-post lift. This allows for shorter columns, hence the lower ceiling height requirement.
This is a commercial grade car lift and should not be confused with any other cheap two-post vehicle lift. This is a Forward Lift® so it has been engineered to perform and built to last!
Need more information? 
Features
- Symmetrical column design with 2-stage symmetric arms
- Carriage latch system - engages every 3"
- Secondary lock system includes a spring actuated slack chain locking device
- Dual hydraulic cylinders
- Powder coated finish
- ALI Certified
- Includes low-profile threaded adapters
- Adapter extensions at 3.5" and 5" (4 each)
Specifications
|
Capacity
|
9,000 lbs. |
| Overall Height | 111-1/4” |
| Overall Width | 138-1/2” |
| Rise | 72" |
| Maximum Rise | 80-1/2” w/5” extension |
| Drive Through Clearance | 97-1/4” |
| Width Inside column | 111” |
| Arm Reach (Min/Max) | 30” / 46-1/4” |
| Minimum Adapter Height | 4-1/2” |
| Drive-over Height | 1-1/2” |
| Voltage/Amps | 208V/230V, 17 amps |
| Motor/Phase | 1ph/2HP |
| Ceiling Height Required | 113" |
Need more information?
