Forward Lift FS77 Scissor Lift
The Forward FS77 7,700 lbs. capacity scissor lift is an engineered low profile small package powerhouse. Taking up less space in a shop is always a plus when you’re looking for a vehicle lift. Standing 4-1/8 inches tall when fully lowered and using less than 44 square feet of space; this lift can be worked around and over while still providing you with shop clearance and cleanliness. This lift can be installed on existing concrete provided it’s adequate for recommended installation, or can be flush mounted for additional clearance. Components of the lift include various metal types to provide high strength, lightweight structure with heavy lifting ability.
Couple the additional features below and you’ve just found the perfect lift for quick service and reliability.
- Patent pending inverse piston synchronizer manifold system synchronizes the platform’s movement
- Provides more positive platform equalization than systems with flow dividers, encoders, string pots, or other feedback devices
- Both platforms stop lowering when one platform is stopped by an obstruction or engaged lock
- Simple design is easy to install, use and maintain
- Low 4 1/8″ collapsed height accommodates lower clearance vehicles
- Reliable, high quality composite bearings reduce required maintenance
- Easy to use control panel with 24 volt DC, non-high voltage switches used
- Open front and rear with no structural connection between platforms or bases increases work area for technician
- Galvanized bottom for corrosion resistance
- Powder coated durable paint finish
- Hinged ramps fold 65 degrees away allowing clearance for wheel work
- Locking ramps increase platform pick-up points
- Ramp rollers protect floors from damage
- Diamond plate ramps increase drive on traction and maintain rubber block positioning
Features
Exclusive Inverse Piston Synchronization equalization system ensures worry-free use
- Low drive-over height allows for easy vehicle positioning
- 78-5/8” rise height
- 24-3/4” wide platforms accommodate a range of vehicles and pickup points
- Durable, diamond plate finish
- Patent pending equalization system with 26 lock positions
- Surface or flush mounted option
Specifications
Capacity | 7,700 lbs. (3500 kg) |
Maximum rise | 78-5/8" (2000 mm) surface mounted 74-1/2" (1895 mm) recessed mounted |
Lowered Height | 4-1/8" (105 mm) |
Overall Length | 85" (2159 mm) |
Overall Width | 85" (2159 mm) |
Platform width | 24-3/4" (629 mm) |
Width Between Platforms | 23-5/8" (600 mm) |
Platform Length | 59" (1499 mm) 85" (2159 mm) w/ramps extended |
Ramp Length | 13" (330 mm) |
Max. Distance from Console to Lift | 85" (2159 mm) |
Voltage | 230V |
Motor/Phase | 1ph/4HP/60Hz |
Rise Time | 39 seconds |
Compressed Air Connection | 85-110 psi |