Page 214 - Q1 2025 Stephenson Equipment Catalogue

PULLERS

Flange-Type Pullers

OTC-6930 $99 55 OTC-525 $210 35 OTC-7790 $269 45

Flange-Type Puller Flange-Type Puller Kit 48-Pc Flange-Type Puller Set
Combination • Flange-type puller for removal of • Versatile puller capable of removing a wide variety of
• Pulls harmonic balancers, timing harmonic balancers, components having tapped pulling holes, including harmonic
gears and parts having two or timing gears, and balancers, gears, crankshaft pulleys, etc.
three tapped holes other parts with
two or three
tapped holes
• Puller for removal
of steering wheel,
pulley, and flywheel

Slide Hammer Pullers

AST-658 $378 85 SGT-66370 $378 45

Stubby Pneumatic Slide Hammer 10 Lb Slide Hammer & Pullers for
• Delivers up to 1,200 blows per minute with the Front Wheel Hubs and Rear Axles
pull of a trigger
• Includes an extension rod for more reach when • Pullers fit 4, 5 and 6 bolt patterns for use on most
domestic and imported cars and light trucks
needed
• Compares to a 3.5-4.5 lb manual slide hammer
on hard joints and 4.5-6 lb on non-hard joints
• Works with the majority of slide hammer
attachments to pull everything from pilot OTC-7703 $206 75
bearings to hubs and collision repair
10 Lb Heavy-Duty
AST-78415 $110 25 Slide Hammer Puller
• 24" long
Locking Pliers Slide Hammer • 5/8" - 18 threaded end adapts to
• Universal puller any of OTC’s pulling attachments
• 2.5 lbs slide hammer
OTC-4579 $270 15

9-Way Slide Hammer
Puller Set
• 5 lb hammer
• Pulls flange-type rear
axles and most
front-wheel drive hubs
CAL-49700 $144 55 • Pulls bearings, gears and seals
14-Pc Slide Hammer and • Dent puller attachment for sheet
Puller Set metal or other unique pulling
requirements
• 2 lb. slide hammer
• Can be used to pull seals, bearings, pressed studs,
or even for straightening body panels
• Capable of inside spreads from 3/8" to 1-1/4" and outer spreads up to 3"
• Puller reaches depths up to 2-1/2"
OTC-7947 $446 65
8-Way Slide Hammer
Puller Set
SUN-3911 $198 05 • 5 lb. hammer
5 Lb. Slide Hammer Puller • Use for 2/3-way internal or
external jobs. Pull flange-type
• Jaws can be set up for rear axles, stubborn oil seals
2 or 3 jaw internal or and bearings, and other
external pulling press-fit parts

214 | April – June 2025