Page 329 - Q2 2026 Stephenson Equipment Catalogue

WELDING & SOLDERING

Oxygen / Acetylene Hose Reels Welding Clamps & Aids

ATD-31170 $321 05 GRI-85281 $20 25
Heavy Duty Retractable 6-Pc Welding Magnet Set
Oxy-Acetylene Welding Hose Reel • Multi-angle design can be used
• 1/4" x 50 ft. twin oxygen/acetylene hoses at 45°, 90° & 135°
• Solid brass fittings and connections with • Includes 2 each:
double O-ring seals for leak-free operation - 25 lb capacity arrow magnets
• Heavy-duty spring driven, automatic rewind - 25 lb capacity hex magnets
• 8-position hose locking mechanism - 9 lb capacity mini magnets
• Reel can be mounted to ceilings, wall, floors,
vehicles, workbenches, etc.

Welding Hammers

TIT-41225 $13 25
Chipping Hammer
• Use to chip and remove
slag from welds
• Coiled spring handle helps Quick Holding Magnetic
absorb shock while chipping Welding Clamps with On/Off Switch
• High strength magnets hold metal workpieces at 45°, 90°
• Switchable style ensures easy precise adjustment: turn the
magnet OFF or at the midpoint position when setting up,
turn ON when you’re ready to work
• Ideal for round and square tubing, angle, and flat stock
MAY-37002 $48 85 Item # Angles Dimensions Pull Force*
12 Oz. Welders ECL-QHCSS 45°, 90° 111 x 92 x 29mm 88 lbs $123.65
Chipping Hammer ECL-QHCSL 45°, 90° 152 x 130 x 35mm 165 lbs $204.25
* Magnetic force is based on the longest side of magnet with 10mm thick steel.

Surge Protectors

IOWCC
GDL-32-030 $446 45
12/24V Antizap Clamp-On
Surge Protector
• Protects vehicle electronics
during MIG, TIG or stick
welding

Inside and Outside Welding Clamps
• Hold and position sheet metal, round pipes,
square, angled or flat stock
• Use mounting holes to link two magnets together
for use as fixturing elements
• Use hex hole on magnet for breakaway leverage
DTF-DF-601A $107 05 Item # Angles Dimensions Pull Force
Surge Protector ECL-IOWCC 30°, 60°, 90° 75.5 x 52 x 14mm 20 lbs $85.35
• Protects electronic (Pack of 2) 30°, 60°, 90° 125 x 85 x 18mm 33 lbs
components ECL-IOWCL 30°, 60°, 90° 165 x 110 x 20mm 40 lbs $69.75
• Works on 12 and 24 Volt
systems NOTE: Must be used for tack welding only and removed before completing weld.

April – June 2026 | 329