Honda GX390 Engine – Horizontal Crankshaft
Quality and performance come standard.
The GX390 features more power, quieter performance, lower fuel consumption, and lower emissions than the previous version. With new features and better performance, the new GX engines establish themselves yet again as one of the best engines in the business.
Common Applications:
- Pressure washers
- Commercial lawn and garden equipment
- Tillers/cultivators
- Forestry equipment
- Generators
- Construction/industrial equipment
- Agricultural equipment
- Small vehicles
- Water pumps
Features:
Description
Spec SheetSpecifications
Engine Type | Air-cooled 4-stroke OHV |
Bore x Stroke | 88 mm x 64 mm |
Displacement | 389 cm3 |
Net Power Output* | 11.7 HP (8.7 kW) @ 3,600 rpm |
Net Torque | 19.5 lb-ft (26.4 Nm) @ 2,500 rpm |
PTO Shaft Rotation | Counterclockwise (from PTO shaft side) |
Compression Ratio | 8.2:1 |
Fuel Tank Capacity | 6.1 litres (6.4 U.S. qts) |
Lamp/Charge coil options | 25W, 50W / 1A, 3A, 10A, 18A |
Carburetor | Butterfly float type |
Ignition System | Digital CDI with variable ignition timing |
Starting System | Recoil/electric |
Lubrication System | Splash |
Governor System | Centrifugal mass type |
Air Cleaner | Dual element |
Oil Capacity | 1.1 litres (1.16 U.S. qts) |
Fuel | Unleaded 86 octane or higher |
Dry Weight | 31.5 kg (69 lbs) |
Dimensions
Length (min) | 407 mm (16.0″) |
Width (min) | 485 mm (19.1″) |
Height (min) | 449 mm (17.7″) |
*The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max net torque). Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.